Emergency Schedule Settings

To save commissioning time on site, Koolmesh also supports batch commissioning for emergency devices which enable users to copy all the parameters setting from exciting devices or use the system default profile directly. Of course, users also can add a new emergency profile according to the real application, all the detail settings please refer to Emergency control devices.

In this section, users can review the system default and all existing profiles for emergency control including those profiles created by other installers or users. Those profile with ""means created by others and cannot be deleted or edited, like “Customer profile” . For those profile created by user can be deleted by slide to left side, see example below.

Users can apply the “system default profile”, then it would be easier. Users can click “System default profile” in the “Select a profile” page and “next” to select the target device and “start setting”. After fnishing, this profile would not appear in the “Select a profile” page but will apply on the device that user chooses.

Also, there are two ways to create and apply a new profile.
1.Copy parameters from an existing device and then “Choose” the device user would like to copy,see example below. Users can rename the profile and change the parameters based on the exciting profile. After that, users can click "" to save and “Next” to select the device
would like to apply and “start setting”. After fnishing, the new profile will appear in the “Select a profile” page.

2.All the setting for “Add a new profile” can refer to 1.